Operation Section
179
How to Fix Forklift to a Carrier
1. The rope/chain must have sufficient length for
fixing.
2. Park the vehicle on a level ground.
3. Set the mast vertically. Lower the fork or
attachment to the lowest position.
4. Set all the operating devices to Neutral Position.
Turn OFF the start switch.
5. Apply the parking brake. Stop the tires with
blocks (D).
6. If the vehicle has a mast, connect fixing
rope/chain to the fork (A) and fix the vehicle
using the reinforcing bar (B) of the lower frame. If
without mast, fix with the drive axle wheel (C).
To Next Page
Loading...
