Doosan D60S-7 - Mast, Carriage, Lift Chains & Attachments - Inspect, Lubricate

Maintenance Section
214
Mast, Carriage, Lift Chains &
Attachments - Inspect, Lubricate
1. Operate the lift, tilt and attachment controls.
Listen for unusual noises. These may indicate a
need for repair.
2. Check for loose bolts and nuts on the carriage.
Remove any debris from the carriage and mast.
3. Check the forks and attachments for free
operation and damage. Have repairs made if
necessary.
Typical Example
4. Brush a film of oil on all links of the chain.
5. Raise and lower the carriage a few times to
allow lubricant to enter into the chain links.
NOTICE
Lubricate chains more frequently than normal in
applications where the lift truck is operating in an
atmosphere which could cause corrosion of
components or when lift truck must work in rapid lift
cycles.
6. Check the air cleaner housing for loose latches.
Lubricate Mast Side Rollers
Typical Example
1. Lubricate the 2 fittings on the inner mast.
Lubricate Carriage Side Rollers
Typical Example
1. Lubricate the 4 fittings for the carriage side
rollers, two on each side of the carriage side
rollers.
Typical Example
2. Lubricate the 2 fittings for the carriage middle
rollers, one on each side of the carriage middle
rollers.