Doosan DL160 - PRODUCT PLATES

K1040196EPresentation
I-VI
PRODUCT PLATES
With the aid of the product plates, shown below, it is possible to
identify the machine and its components. The Product
Identification Number, PIN, indicates the model designation,
engine code and serial number of the machine. The Component
Identification Number, CIN, indicates the serial number of the
component. Make a note of the identification numbers.
When ordering spare parts, and in all telephone enquiries or
correspondence the PIN and CIN must always be quoted.
6
8
1, 2
435
7
FG008048
Figure 1
Reference
Number
Description
1 Primary Marking The machine PIN (stamped into right side).
2 Product Plate The manufacturer's name and address, machine PIN.
3
Additional Plate
for Product Plate
Machine weight, engine output year of manufacture, year of delivery
and position of CE mark (EU/EEA countries only).
4 Cabin
The manufacturer's name and address, product number, machine
model designation, max. machine weight, cabin serial number, ROPS/
FOPS number and ROPS/FOPS certificate number.
5 Engine The engine type designation and number.
6 Front Axle The manufacturer's name and address and front drive axle CIN.
7 Transmission The manufacturer's name and address and transmission CIN.
8 Rear Axle The manufacturer's name and address and rear drive axle CIN.