EasyManua.ls Logo

Doosan HP375WCU-EX-T2 - Page 7

Doosan HP375WCU-EX-T2
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FOREWORD Operation & Maintenance M anual
This compressor should not be used:
• For direct or indirect human consumption of the compressed air.
• Outside the am
bient temperature range specified in the General Data Section of
this manual.
• When an actual or foreseeable risk of hazardous levels of flammable gases or
vapors exist
s.
• With other than Portable Power approved components.
• With guards, controls, or switches missing or disabled.
• For storag
e or transportation of materials inside or on the enclosure.
Portable Power accepts no responsibility for errors in translation of this manual from the
original English version.
You, as th
e customer, are expected to provide certain service and maintenance items. Your
Portable Power dealer will provide all other more detailed s ervice and maintenance items on
a special preventive maintenance schedule for each compressor. It is very important that the
minimum
service and maintenance requirements explained in this manual be performed at
the required intervals. Exceeding these intervals may reduce the reliability of the compressor.
The purpose of this manual is to train the operator with functions, operation, and basic
servic
e and maintenance requirements of the compressor. During the preparation of this
manual, every effort was made to ensure the accuracy and adequacy of the contents.
Your Portable Power dealer will assist with setup and initial startup of the compressor and
will a
lso provide brief operating and service instructions. Before starting the compressor,
this manual and instructions should be carefully read to obtain a thorough knowledge of the
duties to be performed. Please take pride in the compressor, keep it clean and in good
mech
anical condition.
To enable proper maintenance records, Portable Power provides a Noise Emission Control
Maintenance Log in the Noise Emission Section of this manual. The Noise Emission Section
con
tains a recommended Maintenance schedule and provides space in the log for the
technician to note what service and maintenance was done, by whom, where, and when.
7