Operation & Maintenance Manual Lubrication
58
Lubrication
Portable Compressor Fluid Chart
Refer to these charts for correct compressor fluid required. Note that the selection of fluid is
dependent on the design operating pressure of the machine and the ambient temperature
expected to be encountered before the next oil change.
NOTE: Fluids listed as “preferred” are required for extended warranty.
Compressor oil carryover (oil consumption) may be greater with the use of alternative
fluids.
Design Operating
Pressure
Ambient
Temperature
Specification
100 psi to 300 psi
-10°F to 125°F
(-23°C to 52°C)
Preferred:
Pro-Tec™
Alternate:
ISO Viscosity Grade 46
with rust and oxidation
inhibitors, designed for
air compressor service.
350 psi
-10°F to 125°F
(-23°C to 52°C)
65°F to 125°F
(-18°C to 52°C)
Preferred:
XHP 605
Alternate:
XHP405
ISO Viscosity Grade 68
Group 3 or 5 with rust and
oxidation inhibitors
designed for air
compressor service.
Preferred:
XHP605
XHP1001
To Next Page
Loading...
