Dorma Prosecure Opti Motion Stereo User Manual

Prosecure Opti Motion Stereo
—
WN 058109 45532, 09/14
Sensor for approach detection at industrial doors
In order to comply with the safety requirements of
EN 60650-1 and UL508, the sensor must be operated
with safety extra-low voltage (SELV).
The total output power must not exceed 100 W under
any circumstances. Use for example T2, 5A fuse to
ensure compliance.
Delivery package
1 Sensor
1 Connection cable
2 Screws for mounting (in the housing)
1 Self-adhesive mounting template
1 Mounting instructions
Elements
 LED (red/green)  Potentiometer
 IR receiver  Connector
 IR transmitter  Antenna
 DIP switches
1 2
OPEN
3 4 5 6
1 7
4 5 6
23
Components can be damaged by electrostatic energy!
Do not touch any electronic components.
Do not use metal tools.
Preparation
Insert the screwdriver into
the opening provided from
behind, carefully lift up the
cover, fold upwards and
remove.
Do not open
the housing from the top.
Turning the antenna (to change the antenna characteristics)
Remove the antenna
carefully using two fingers
and insert in the antenna
orientation for the required
detection area.
Do not bend the contacts.
Do not touch the surface of the antenna.
Antenna characteristics
A wide or narrow detection area can be set with the turnable
antenna.
Installation height 2.20 m
Detection area angle 30°
Detection area size Max
Wide
Width:
Depth:
4.50 m
2.00 m
Narrow
Width:
Depth:
2.00 m
4.50 m
Installation information
• Protect the sensor from
rain*.
• Avoid moving objects
in the detection area
(fans, plants, etc.).
• Do not cover the sensor.
Mount the sensor only
behind suitable covers.
• Moving drive components
affect the sensor.
• Avoid fluorescent lights in
the detection area.
• The installation conditions
may limit the program-
ming options and the
functions of the sensor.
* DORMA recommends
installing a weather cap
for outdoor applications
Accessories
Remote control
Rain protection cover
Mounting
Attach the self-adhesive
template and drill according
to the hole pattern.
Guide the cable through the
opening provided.
Fasten the baseplate using
the screws (screws are in
the housing).
Can be mounted on the
ceiling using the rain protec-
tion cover.
Connecting the sensor
Connect the cable
to the terminal as follows:
 white = GND
 brown = 12 - 36 V DC/
12 - 28 V AC
 green = COM
 yellow = NO/NC
1
2
3
4
Replacing the cover
Attach the cover on the top
and press down until it snaps
into place.
click

Dorma Prosecure Opti Motion Stereo Specifications

General

Brand	Dorma
Model	Prosecure Opti Motion Stereo
Category	Accessories
Language	English

Summary

Antenna Characteristics and Installation

Antenna Characteristics Overview

Details on detection area size and angle adjustment for the turnable antenna.

Installation Information for Antenna

Guidance on protecting the sensor and avoiding interference sources.

Mounting Instructions

Steps for attaching the baseplate and mounting the sensor unit.

Accessories

Optional items for enhancing the sensor's functionality or protection.

Sensor Adjustments and Settings

Adjusting the Inclination Angle

Procedure for modifying the sensor's vertical position in 5° increments.

Setting for Inclined Detection Area

How to adjust the PCB for horizontal detection range in 2.5° increments.

Detection Area Size and Sensitivity

Using the potentiometer to change the detection range and sensitivity.

Detection Capabilities

Explanation of directional detection and cross-traffic suppression features.

Slow Motion Detection Modes

Configuration for 'Door open' and 'Door closed' settings for slow movements.

Setup Procedure

Initial steps for testing and verifying sensor settings in the door area.

Advanced Functions and Configuration

Additional Functions Mode

Enabling extra functions during the initialization period using DIP switches.

Initialisation Period

Process and duration of sensor hardware/software initialization.

Slow Motion Detection Area Settings

Configuring detection area size for slow motion modes via potentiometer.

Restoring Original Settings

Procedure to reset the sensor to its factory default configuration.

DIP Switch Settings and Remote Control

DIP Switch Settings Table

Reference table for various detection and motion settings using DIP switches.

Relay Contact Configuration

Understanding NO/NC relay contact behavior during detection.

Programming with Remote Control

Requirements and initial steps for using the remote control.

Remote Control Operation and Security

Establishing Sensor Connection

Steps to select sensor type, address, and establish communication.

Secured Access and Code Protection

Methods for protecting the sensor from unauthorized programming.

Remote Control Settings Menu

Overview of adjustable parameters like sensitivity, detection mode, and off-delay.

Troubleshooting and Technical Specifications

Troubleshooting Common Issues

Solutions for problems like false detection, no LED, or unresponsive controls.

Original Default Settings

List of factory default configurations for various sensor functions.

Technical Data

Specifications including operating principle, detection range, and environmental limits.

EC Declaration of Conformity

Statement confirming compliance with relevant European directives and standards.