Dormakaba M1000 Series - User Manual

M1000 mechanical mortise locks
Installation instructions
1M1000 series 12-2023www.dormakaba.us94740_C
Tools required
# Phillips screwdriver
# Phillips screwdriver
Parts list (Sectional trim)
. Inside rose
. - x -/" screws
. Inside lever assembly
. #-/" screws
. Thumb turn
. Chassis
. - x /" combo-screws
. Armor plate
. - x /” screws
. Outside lever assembly
. Mortise cylinder
. Wave washer
. Cylinder ring
. Allen key (included)
Parts list (M escutcheon trim)
. Inside lever assembly
. - x -/" screws
. Inside escutcheon assembly
. - x -/" screws
. Escutcheon mounting plate
. Chassis
. - x /" combo-screws
. Armor plate
. - x /" screws
. Outside escutcheon assembly
. Mortise cylinder
. Wave washer
. Cylinder ring
. Allen key (included)
Parts list (H escutcheon trim)
. Inside escutcheon assembly
. - x -/" screw
. Chassis
. - x /" combo-screws
. Armor plate
. - x /" screws
. Outside escutcheon assembly
. Mortise cylinder
. Wave washer
. Cylinder ring
. Allen key (included)







































Hinge
Hing
e
Exterior side of door
Interior side of door
Left hand door (LH)
Left hand reverse
door (LHR)
Right hand reverse
door (RHR)
Right hand door (RH)
1.1 Determine door handing 1.2 Reverse direction of latch (if necessary)
.. Change latch bolt handing if it does not match
door handing.
NOTE: Orient latch as seen in images.
.. Remove latch bolt set
screw with provided
allen key.
.. Remove latch
from mortise
lock.
.. Rotate latch
°.
.. Reinstall latch
into lock.
NOTE: Be sure latch foot is raised when reinserting latch.
.. Reinstall latch bolt
set screw and
tighten securely.
Allen key
Allen key
Latch foot
1 Handing instructions

Dormakaba M1000 Series Specifications