Need help?Do you have a question about the Dormakaba System 6000 and is the answer not in the manual?
General| Brand | Dormakaba |
|---|---|
| Model | System 6000 |
| Category | Media Converter |
| Language | English |
Specifies minimum hardware requirements for the dormakaba RFID encoder.
Specifies minimum software requirements for System 6000.
Details power options (POE or USB) and the TCP/IP communication protocol.
Lists required TCP/IP ports that must be open in the firewall for communication.
Connect encoder via USB, open CRS program, add encoder, and select Kaba RFID type.
Select encoder, enter Station ID, and configure IP settings (DHCP or Static IP).
Log into Client, access System tab, and set the Encoder Station ID in Terminal Settings.
Test encoder connection by attempting a key interrogation.
Lists common issues and checks for establishing encoder connectivity.
Lists common issues and checks for correctly configuring the encoder.
To Next Page