To Next PageTo Next Page
Need help?Do you have a question about the DORN TT-BC520-2 and is the answer not in the manual?
Indicates a precaution, warning, or danger. Ignoring can lead to accidents.
Refer to the corresponding paragraph in the manual before use.
Specifies the recommended ratio of fuel to lubricant.
Alerts that exhaust and exhaust gases are hot.
Warns of injury from flying parts and advises safe distance.
Warns that sparking can ignite flammable gases.
Prohibits naked flames or smoking near the appliance.
Warns about the risk of blade thrust.
Indicates the need for ear protection, eye protection, and gloves.
Advises wearing head protection where falling objects are a risk.
Recommends wearing robust footwear when using the device.
Covers reading instructions, familiarization with controls, and proper use of equipment.
Details crucial preparation steps including fuel handling and equipment inspection before use.
Outlines safe operating procedures, environmental conditions, and precautions during use.
Discusses potential health effects of vibration and measures to mitigate them.
Outlines permitted uses and clarifies user liability for misuse or unauthorized modifications.
Identifies the specific model of the brush cutter.
Details the type and cooling system of the engine.
Specifies the volume of the engine cylinders.
States the peak power output of the engine.
Indicates the maximum rotational speed of the engine.
Defines the recommended ratio of fuel to oil for the engine.
Measured sound pressure level according to standard.
Guaranteed sound power level according to standard.
Details the measured vibration levels for the machine.
Specifies the width of cut when using the grass trimmer.
Specifies the width of cut when using the brush cutter.
Explains the standard used for measuring sound values.
Discusses noise exposure factors, operational limits, and hearing protection.
Explains the standard used for measuring vibration values.
Discusses vibration exposure levels and recommended mitigation measures.
Identifies the main engine unit of the brush cutter.
The mechanism used to start the engine manually.
The grip and control section of the brush cutter.
Controls the engine speed via the throttle.
Turns the engine on or off.
Guards against debris from the cutting attachment.
A specific type of cutting blade for the brush cutter.
The attachment for using cutting line.
Support system for the operator to wear the brush cutter.
Steps for attaching and securing the handle assembly.
Instructions for connecting the throttle wire to the carburetor.
Steps for connecting the switch wires between engine and main unit.
How to attach the protection shield to the shaft tube.
Procedure for mounting the blade, washer, and nut.
Steps for mounting the trimmer head onto the axle.
Explains mounting the trimmer knife and automatic line advancement.
Emphasizes the importance of wearing the harness securely and safely.
Provides step-by-step guidance on how to put on the harness.
Explains how to adjust the harness for proper balance and comfort.
Alerts to the flammability of gasoline and safe handling practices.
Provides important notes on fuel types, oil, and storage of mixed fuel.
Details the correct method for mixing fuel and oil.
Outlines the steps for safely filling the fuel tank.
Specifies safety measures for the fueling location and post-fueling actions.
Step-by-step guide to safely start the brush cutter engine.
Warns that the cutting head rotates when the engine starts.
Advises on correct starter rope usage to prevent failures.
Provides guidance for restarting a warm engine and avoiding over-choking.
Instructions for safely shutting down the engine.
Advises against stopping the engine while pulling the throttle lever, except in emergencies.
Explains how to adjust the engine's idling speed.
Recommends warming up the engine before adjusting idle speed.
Guidelines and safety precautions for using the trimmer head.
Emphasizes wearing eye protection and keeping the debris guard attached.
Tips for efficient grass and weed trimming.
Describes the automatic line advancement mechanism.
Instructions and safety for using metal blades.
Advises choosing a suitable cutting attachment for the task.
Stresses using gloves and proper tools when handling blades.
Warns about potential accidents from incorrectly fastened rotating parts.
Technique for cutting using the front left side.
Method for guiding the blade from right to left.
Strategy for mowing wide areas to avoid interference.
Guidance on adjusting engine speed and depth for dense weeds.
Warns about the blade seizing in weeds and how to react.
Covers checks and maintenance for fuel, idle speed, spark plug, and air vents.
Details maintenance for cutting parts, transmission, fasteners, and guards.
Step-by-step guide for replacing and winding the trimmer line.
Instructions for cleaning and replacing the air filter element.
Procedures for inspecting the muffler and fuel filter for issues.
Guide to checking spark plug condition and clearing cooling vents.
Lists probable causes and actions for engine starting failures.
Identifies causes and solutions for engines that don't run smoothly or restart.
Advises on preparing the unit for storage, focusing on fuel management.
Guidance on safely carrying the product by hand.
Precautions for transporting the product by vehicle to prevent fuel spillage.
General| Brand | DORN |
|---|---|
| Model | TT-BC520-2 |
| Category | Brush Cutter |
| Language | English |
