EasyManua.ls Logo

DORN TT-BC520-2 - Troubleshooting Guide; Troubleshooting: Starting Failure; Troubleshooting: Running and Restarting Issues; Storage

DORN TT-BC520-2
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING GUIDE
Case 1. Starting failure
-----------------------------------------------------------------------------------------------------------------------------------------
CHECK PROBABLE CAUSES ACTION
-----------------------------------------------------------------------------------------------------------------------------------------
fuel tank incorrect fuel drain it and with correct fuel
fuel filter fuel filter is clogged clean
carburetor adjustment screw out of normal range adjust to normal range
sparking (no spark) spark plug is fouled/wet clean/dry
plug gap is incorrect correct (GAP: 0.6~0.7mm)
spark plug disconnected retighten
-----------------------------------------------------------------------------------------------------------------------------------------
Case 2. Engine starts but does not keep running/Hard re-starting.
-----------------------------------------------------------------------------------------------------------------------------------------
CHECK PROBABLE CAUSES ACTION
fuel tank incorrect fuel or staled fuel drain it and with correct fuel
carburetor adjustment screw out of normal range adjust to normal range
muffler,cylinder (exhaust port) carbon is built-up wipe away
air cleaner clogged with dust wash
cylinder fin, fan cover clogged with dust clean
-----------------------------------------------------------------------------------------------------------------------------------------
When your unit seems to need further service, please consult with service shop in your area.
STORAGE
Aged fuel is one of major causes of engine starting failure. Before storing the unit, empty the fuel tank
and run the engine until it uses all the fuel left in the fuel line and the carburetor. Store the unit indoor
taking necessary measures for rust prevention.
TRANSPORTATION
1. When hand-carrying the product, cover over the cutting part if necessary, lift up the product and
carry it paying attention to the blade.
2. Never transport the product over rough roads over long distances by vehicle without removing all
fuel from the fuel tank. If doing so, fuel might leak from the tank during transport.