Doro 525 - Operation; Making a Call; Receiving a Call

English
www.doro.com 11
Operation
Important!
Please note when programming all references to press = to press once and then immediately
release the button.
Making a Call
1. Enter the required telephone number. Mistakes can be erased using C.
2. Press q the telephone number will now be dialled.
3. Press q again to terminate the call.
Please note!
If the telephone cannot connect to a line, a warning tone will be heard. The problem may
be due to the battery running low, the handset being too far from the base unit or all of the
transmission channels being engaged.
Receiving a Call
1. Wait for the handset to ring.
2. Press q to answer the call.
3. Press q again to terminate the call.
Redial Button
The ten most recently dialled numbers can easily be redialled using
r
:
1. Press
r
repeatedly to scroll through any dialled numbers.
2. Press q the displayed number will now be dialled.
Key Lock
This function locks the push buttons on the handset to prevent unintentional
usage.
1. Press and hold N until the display shows .
2. To deactivate the key lock press and hold N again until is no longer
displayed.
Calls can still be received, even if the key lock is active. When the call is
nished, the handset returns to locked mode.