Doro 525 - PIN Number; Reset Handset Defaults

English
www.doro.com 17
Settings
PIN Number
The PIN number is a four-digit code (0000 when supplied) which can be
changed to a number of your choice. It protects against unauthorised use/access
of certain functions.
1. Press
º
.
2. Press 1.
3. Enter the telephones PIN number (0000 when supplied). Press
º
.
4. Enter your new PIN number. Press
º
.
5. Enter your new PIN number again. Press
º
.
Tone/Pulse Dialling (UK only)
Select the dialling type (tone or pulse), the default setting is tone dialling. It is
unlikely that this will need to be changed however should your network require
pulse dialling follow the steps below.
1. Press
º
.
2. Press *.
3. The current setting will be displayed (1
┘
2=pulse, 2
┘
2=tone).
4. Select either tone or pulse by pressing the corresponding keypad digit 1-2.
5. Press
º
to conrm.
Reset Handset Defaults
You can reset most of the handsets functions and settings back to the original
factory defaults.
1. Press
º
.
2. Press 9.
3. Enter the telephones PIN number (0000 when supplied). Press
º
.