English
12 www.doro.com
Operation
Mute Button
The microphone can be muted during a call by pressing C , press C again to re-
activate the microphone. z will be displayed as long as the function is active.
Memory
This telephone has 10 memory locations numbered 0-9.
Storing telephone numbers
1. Press
º
.
2. Press b .
3. Select a memory location (0-9) by repeatedly pressing b .
4. Enter the telephone number (up to 18 digits). Press C to delete or make changes.
5. Press
º
to save.
Please note!
If you need to insert a pause in the telephone number, press and hold 0 until the display shows P. If
you need to change a number, store the new number in the same location as the old one.
Dialling Stored Telephone Numbers
1. Repeatedly press b until the number required is displayed. You can also enter the
memory position directly by pressing b then the relevant memory location 0-9.
2. Press q the displayed number will now be dialled.
Erasing a Stored Telephone Number
1. Press
º
.
2. Repeatedly press
b
until the number required is displayed.
3. Repeatedly press
C
to delete the displayed number.
4. Enter the new telephone number to be stored.
5. Press
º
to save.
Erasing ALL Stored Telephone Numbers
1. Press
º
.
2. Press
0
.
3. Press
b
.
4. Press
º
.
To Next Page
Loading...
