Doro 610 - Redial Function; Mute Button; Direct Dialling

English
2
Redial function
Press
r
and scroll among the 10 most recently dialled numbers using
r
. Press q. to
redial the selected number.
Mute button
The microphone can be turned off/on during a call using
C
(z = mic off).
KeyGuard
The KeyGuard is turned off/on by pressing and holding
#.
Direct Dialling
This feature allows a preset number to be dialled regardless of which button is pressed
(except
º
). When active the stored number and BB will be displayed.
Storing the Direct Dial Number
1. Press
º
3.
2. Enter the PIN number (0000 when supplied). Press
º
.
3. Enter the telephone number (up to 18 digits). Press
º
(C=delete).
Turning Direct Dial On/Off
1. Press
º
2.
2. Enter the telephones PIN number (0000 when supplied). Press
º
.
3. Press
º
toconrm.
Memory
This telephone has 10 memory locations numbered 0-9.
Storing telephone numbers
1. Press
º
b .
2. Select a memory location (0-9) by repeatedly pressing b .
3. Enter the telephone number (up to 18 digits). Press
º
(C=delete).
Please note!
If you need to insert a pause in the telephone number, press and hold 0 until the display shows P.
If you need to change a number, store the new number in the same location as the old one.
Dialling Stored Telephone Numbers
1. Repeatedly press b until the number required is displayed. You can also enter the
memory position directly by pressing b then the relevant memory location 0-9.
2. Press q to dial the displayed number.
Erasing ALL Stored Telephone Numbers
Press
º
0
b º
.