English
4
PIN Number
The PIN number (four-digits) protects against unauthorised access of certain functions.
1. Press
º
1.
2. Enter the telephones PIN number (0000 when supplied). Press
º
.
3. Enter your new PIN number. Press
º
.
4. Enter your new PIN number again. Press
º
.
Paging
The handset will ring when
J
on the base unit is pressed. The signal will stop
automatically after a while or if the q button on the handset or the
J
button on the
base unit is pressed.
Expanded system (+1...)
The base unit should be centrally positioned so that the area covered is roughly equal for
both handsets. The handset number is showed in the display in stand-by.
It is NOT possible to add additional handsets at a later time.
Intercom
1. Press and hold
R
until the display shows
int
.
2. Enter the handset number for the handset that you wish to call, 1 - 4.
Should an external call come in while an internal call is in progress, a tone will be heard.
You must then terminate the internal call by pressing q, press q again to receive the
external call.
Transferring calls/Conference between handsets
1. While an external call is connected on line.
2. Initiate an internal call as described above.
3. Press q to transfer the call or press
5
for conference.
To Next Page
Loading...
