English
Note! If nothing is displayed although you know that there should be
available networks, set the switch to
off and then on again.
3. Select your wanted network and press
and enter the Password.
Note! Check Show password to see it in clear text.
4. Press Advanced options if you need specific settings.
5. Press Connect to connect.
A connected Wi-Fi network is displayed in the top of the list. Select it and
press
for connection details. Press Forget if it’s an unwanted network,
to disconnect from it and stop connecting to it automatically.
Connect to a network manually
You can also choose Add network to manually configure your network.
This is usually done if the wireless network or SSID is hidden.
1. Press
Menu Settings Network & Internet Wi-Fi.
2. Press Add network to connect to a network with hidden SSID (Service
Set Identifier).
3. Enter the requested information needed to be able to connect. Press
Save.
Wi-Fi preferences
1. Press
Menu Settings Network & Internet Wi-Fi Wi-Fi
preferences:
• Install certificates to install and manage security certificates.
• WPS Push Button: First press the Wi-Fi Protected Setup button
on your router. It may be called WPS or marked with this symbol
.
• WPS Pin Entry: Enter the given PIN code on the router/access
point. The setup can take up to two minutes to complete.
Saved networks
View your saved networks. Select it and press
. Press Forget if it’s an un-
wanted network, to disconnect from it and stop connecting to it
automatically.
46
To Next Page
Loading...
