Doro 820 - Settings; The Handset ringer

English
www.doro.com 13
Settings
Description of the menu system
The telephone has a menu system, controlled by the following buttons:
w
Activates and deactivates the menu system.
0
Move one step forward and/or con rm selected option.
x
Used to erase/correct.
< <
/
> >
Scroll through the menu alternatives.
The Handset ringer
There are three different ringer tunes.
- One for regular incoming calls,
- One for incoming calls from numbers stored in Phone book 1
b
,
- One for incoming calls from numbers stored in Phone book 2
.
The display also shows the attached symbol during ringing and only applies if you
subscribe to Caller ID services. There is NO ringer in the base unit.
1.
Press
w
.
2.
Scroll using
< <
/
> >
until
%
 ashes in the display. Press
0
0
.
0
3.
Display shows 1/4 and current ringer volume (+=low, ++=medium, +++=high
and ++++=maximum).
4.
Scroll using
< <
/
> >
to the desired setting. Press
0
0
.
0
5.
Display shows 2/4 and current ringer tune for regular incoming calls.
6.
Scroll using
< <
/
> >
to the desired setting. Press
0
0
.
0
7.
Display shows 3/4 and current tune for numbers stored in Phone book 1.
8.
Scroll using
< <
/
> >
to the desired setting. Press
0
0
.
0
9.
Display shows 4/4 and current tune for numbers stored in Phone book 2.
10.
Scroll using
< <
/
> >
to the desired setting. Press
0
to con rm.
0
to con rm.
0
11.
Press
w
to exit the Menu system.
Please note!
If a number stored in the Phonebook is Secret the regular ringer signal will be heard.
Although the caller may be stored in one of the phone books, the  rst ringer signal may still be the
regular signal until the number has been identi ed.
The telephone’s ringing signal does not follow the line signal, ie it may continue to ring for up to 7
seconds after answering a call.