EasyManua.ls Logo

Doro Sara - General Information and Maintenance; Key Usage Guidelines; Device Maintenance and Cleaning; Technical Data

Doro Sara
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Doro Sara
GENERAL INFORMATION
If the telephone line is not working, no alarm can be sent.
The carephone should be connected to the master telephone socket in
the home.
In order for an alarm to be sent, at least one alarm receiver/response
centre needs to be programmed.
The carephone must not come into contact with water or any other liquid.
Used batteries should be disposed of in an environmentally-responsible
manner.
MAINTENANCE
Cleaning
The carephone and portable alarm trigger should be cleaned using a slightly
damp cloth. Solvents should not be used when cleaning.
Replace the carephone batteries
Battery should be replaced a.s.a.p after battery alarm or within three years,
please refer to the service manual or contact your supplier.
Replace the radio trigger batteries
To replace the radio trigger batteries, please refer to the service manual or
contact your supplier.
Technical data
Carephone Doro Sara
Dimensions: 114 x 200 x 36 mm (LxWxH)
Power supply: Enclosed power adapter
Backup batteries: 4.8V NiMH battery pack
Backup time: Up to two days
Inputs: Two opto isolated
Output: Relay output, potential-free , max 2A
Communication: Analogue telephone line
Radio frequency: 869.2125 MHz
Radio receiver class: 1*
Number of radio transmitters: Up to 9
*Refers to radio module ”C1”, type 9340.

Other manuals for Doro Sara