Chip Build-up
9. When grinding larger stumps, chips may begin to build up under the wheels.
Release brake and pull machine towards you so that the “chip pile” is directly under
the cutter wheel.
Drop cutter wheel down on “chip pile”, material will be discharged from machine
area.
WARNING: Flying Debris Hazard
Stones, chips and debris can cause serious injury or property damage. Debris
can fly 23 meters in any direction out of the chute and bounce off objects
and hit operator, bystanders or breakable objects.
On these larger stumps, DO NOT allow grinder wheels to drop into stump hole. If a hole
is in the way of your progress, fill it with chips or change position.
WARNING:
Stop engine and set brake before leaving operator’s position. KEEP
BRAKE ENGAGED except when changing locations. Never attempt to ride
or stand on stump grinder.
10. When finished, stop the machine.
11. Pull machine away from stump, and rake chips away from stump.
To Next Page
