Dossena SRI3/I2 - User Manual

SRI3/I2
Codice Ordinazione - Code Commande - Order code:
9SRI3/I2 – 9SRI3/I2RS485 – 9SRI3/I2CC -9SRI/I2CCRS485
Dim: 6 DIN
FIG1 FIG2
FIG3
FIG4
MU1235 REV 7
ATTENZIONE- WARNING- ATTENTION- Gli IMD non devono essere collegati in parallelo– IMDs shall not be connected in parallel- Les CPI ne
doivent pas être connectés en parallèle

Summary

Description and operation mode

Normal activity of insulation control

Describes the parameters and key functions displayed during normal operation.

Installation Requirement and Safety Precaution

Safety Measures and Installation Guidelines

Details essential safety measures and installation guidelines for qualified personnel.

TECHNICAL FEATURES

Insulation Measure Specifications

Specifies parameters and standards for insulation resistance measurement.

Internal Temperature and Voltage Measurement

Details measurement accuracy for internal temperature and voltage.

Interface Specifications

Outlines specifications for output contacts, serial interface, and resistance.

ALARMS

Alarm Causes and Descriptions

Lists specific alarm triggers, their causes, and corresponding display messages.

SETUP MODE

Parameter Configuration and Navigation

Explains how to navigate the setup menu and configure device parameters.

TEST FUNCTION

Device Operational Test Procedure

Details the procedure for testing the device's operational correctness and relay functions.

TECHNICAL APPENDIX

Response Times vs. Capacitance Graph

Illustrates the relationship between response times and system leakage capacitances.

Dossena SRI3/I2 Specifications

General

Brand	Dossena
Model	SRI3/I2
Category	Relays
Language	English