DoubleSight DS-307W User Manual

Connecting to PC
1514
Connecting to PC
OSD Control
To connect the monitor to the PC, please follow these instructions:
1. Connect DVI cable to the PC. Tighten all the screws.
2. Connect DVI cable to the DVI connector on the back of the monitor. Tighten all the screws.
3. Connect one end of the power cord to the AC adaptor and the other end to the AC power outlet.
4. Connect DC adaptor cable to the power input connector on the back of the monitor.
5. Turn On the monitor and PC.
6. Adjusting display resolution of PC
This monitor does support OSD Menu control function.
- Resolution : 2,560 X 1,600
- Refresh Rate : 60 Hz
④③②①
① : Power On / O
② : Volume Up & Down / OSD Menu Left & Right
③ : OSD Menu Up & Down / Channel Up & Down
④ : Input Source Select / OSD Sub Menu Select
⑤ : OSD Menu On / O
⑤
▲
▼
S
M
Adjusting the Monitor Screen
How to adjust monitors
S
Source Settings
Signal Source - select screen input
(VGA1, VGA2, DVI, HDMI, Comp)
OSD Menu
M
OSD Menus - select menus from
(PICTURE, MISC, PC, SYSTEM)
(Detailed description in next page)

DoubleSight DS-307W Specifications

General

Brand	DoubleSight
Model	DS-307W
Category	Monitor
Language	English