To Next PageTo Next Page
Need help?Do you have a question about the Douglas Battery LegaC2 DL1 and is the answer not in the manual?
General| Model | LegaC2 DL1 |
|---|---|
| Category | Battery Charger |
| Output Voltage | 12 VDC |
| Compatible Battery Types | Lead Acid, AGM, Gel |
| Protection Features | Overload, Short Circuit, Reverse Polarity |
| Charging Stages | 3-stage (Bulk, Absorption, Float) |
Defines letter codes for charger output power in part numbers.
Codes for cabinet size and DC cable gauge in part numbers.
Codes for DC voltage, AC voltage, and frequency in part numbers.
Letter codes for charging profiles and available specialty options.
Details on modules, AC/DC voltage, current, Hertz, phase, CEC/cULus.
Guidelines for charger placement, ventilation, and wall mounting.
Instructions for safe input power connection, AC/DC wiring, and grounding.
Overview of charger functions, charging initiation, current, and AC fail handling.
Requirements for charging multiple batteries in series.
Definitions of charging profiles, equalization, and refresh charging.
Accessing the main menu and viewing stored charging cycle data.
Details of memorized data and charger status information.
USB functions for updates and parameter settings like date, time, language.
Information shown when idle and how to start a charge cycle.
Functionality for delayed starts and information during active charging.
Charger state after completing charge without equalization.
Process for manual and automatic equalization charges.
Details, causes, and solutions for critical and non-critical faults.
Details, cause, and solution for the DEF ID fault code.
