Douze G4 - Tightening Torque Specifications; Component Tightening Torque Values

Tightening torque
To guarantee the proper functioning of your G4 and the life of its components, it is               
essential to check the tightening torque regularly and re-screw them correctly, if you            
observe any problems. Carry out tightening by means of a torque spanner, while            
observing the values provided in the table below. If you cannot find the tightening             
torque value for any component, seek the advice of your Retailer or your DOUZE             
Cycles Technical Centre.
COMPONENTS
TIGHTENING TORQUE


Transmission

Dérailleur
8-10 Nm
Chain tensioner
8-10 Nm
Cartridge
40 Nm
Pedal cranks
30-40 Nm
Pedals
30-40 Nm
Brakes

Brake callipers
6-8 Nm
Brake discs
5-7 Nm
Steering

Bicycle stem
Cap 6-7 Nm / Stem 8 Nm
Fork clamp
Cap 6-7 Nm / Clamp 8 Nm
Slider
6-8 Nm
Handlebars

Grips on the stem
3 Nm
Brake levers on the stem
6-8 Nm
Enviolo joystick
2-3 Nm
Shifter
6-8 Nm
Saddle on seatpost
9-10 Nm
Seat post on frame
9 Nm
Accessories

Mudguard
6-8 Nm
 
DOUZE Cycles - G4 Manual - March 2020 21