Commissioning
Every DOUZE Cycles rider is unique. Your cargo bike has been designed to be used in daily
life, whether for business or for pleasure. So it is imperative to adjust your G4 to your body
shape for optimal comfort and safety. Your Retailer or DOUZE Cycles Technical Centre will
help you to carry out such adjustments at the time of servicing your cargo bike. These can
be refined during the first mandatory servicing.
Adjusting the saddle height
Proper adjustment is made by positioning the pedal in the lower position. When you place
your heel on the pedal, your leg should be extended without being rigid. Adjustments are
made by loosening the screw of the clip with a 5 mm Allen key. Once the height has been
adjusted, tighten the screw to the recommended torque that you will find in the torque
settings.
For your safety, do not exceed the exit limit of the seat post, as indicated
on the seat tube by the marking “MIN Insert”.
Adjusting the saddle
The saddle clamp allows adjustment of the slope and the height in order to suit its position
to your body shape and your way of riding bikes. Neutral configuration is obtained with the
saddle horizontal and the clamping in the centre. The height of the saddle can be adjusted
according the length of the thighbone.
Adjusting the height of the handlebars
Your DOUZE V2 is supplied with an adjustable steering column over a height of 100 mm,
variable without needing any tools by means of a quick clamping system. This allows you to
change your riding position according to your body shape, habits and loads.
Adjusting the brake levers
So that the brake levers fall directly under the fingers and reduce the braking reaction time,
the proper position of the levers lies within the extension range of your forearms.
DOUZE Cycles - G4 Manual - March 2020 7
To Next Page
Loading...