Advanced settings 33
RTS length is a setting that affects the quality of the wireless transmissions.
If you experience inconsistent data fl ow you can decrease this value in
small steps to reduce this problem. The default value is 2311.
Wireless Radio enables or disables the WLAN. If you do not use any
Wireless LAN devices it is recommended that you select disable.
Click on
Save WLAN Settings and then Restart for the changes to take
effect.
WLAN->Authentication: The encryption settings for your private Wireless
LAN.
Encryption
is disabled by default. Choose Enable to show the
available settings. There are three types of encryption methods in the
Authentication Type drop-down menu, WEP Open System, WEP Shared
Key
and WPA-PSK.
WEP Open System encrypts all data that is sent over the wireless network
but does not use any authentication. This means it is still possible for
all clients in range to log onto the 3GN, but without the correct key
they will not be able to communicate with it. To activate this setting,
choose
WEP Open System from the Authentication Type drop-down
menu. Then choose a
Key Type, either HEX (range 0-9 and A-F) or
ASCII (any character on the keyboard). Choose
Key Size; 64 bits (for
HEX this is 10 characters and for ASCII 5 characters) or 128 bits (for
HEX this is 26 characters and for ASCII 13 characters): the longer the
key, the stronger the encryption. The key is case sensitive. You have the
possibility to defi ne 4 keys at once so that you can easily change key to
maintain security.
8388 3GN manual hopslagn.indd Avs1:258388 3GN manual hopslagn.indd Avs1:25 2010-01-04 14.092010-01-04 14.09
To Next Page
Loading...
