Safety
Instruction manual
3
Before using this printer, please read and fully comply with these
instructions, the safety data sheet (SDS) for consumables used, and
safety labels afxed to the printer. Servicing must be performed only
by qualied people who are appropriately trained.
■ Liability
Markem-Imaje shall not be liable for any damage or injury resulting from any
failure to follow these safety instructions, as well as good manufacturing practices
and safety standards that are generally applicable in the industry, when installing,
using or servicing Markem-Imaje equipment.
Any user who modies or repairs Markem-Imaje equipment, uses consumables,
spare parts or accessories other than those supplied by Markem-Imaje, or fails
to comply with Markem-Imaje specications shall have sole responsibility for the
consequences thereof.
Markem-Imaje shall not be liable for any malfunction or damage caused by any
modication of the equipment or use of the equipment for any purposes other
than those for which it is designed. The user shall be solely responsible to take
any precautions required by any use to which the user puts the Markem-Imaje
equipment.
Markem-Imaje consumables (inks, cleaning products and other consumables),
spare parts and accessories are designed for use with Markem-Imaje equipment.
Use of consumables, spare parts or accessories, that are not produced or
recommended by Markem-Imaje for use with the specic Markem-Imaje
equipment may harm the equipment and cause performance failures.
Because Markem-Imaje equipment is tested with Markem-Imaje consumables
and spare parts for conformity with certain regulations and safety standards, use
of non-Markem-Imaje consumables and spare parts also may be inconsistent with
testing conditions and affect compliance of the equipment with certain standards.
The user shall bear all risks associated with use of unsuitable consumables and
spare parts.
This equipment is certied in accordance with the requirements for CE marking.