Safety
Instruction manual
7
■ Use
The printer is designed for drop-on-demand thermal ink jet industrial
marking and coding. Any other use of the printer is prohibited, and any
consequences shall be under the entire responsibility of the user.
■ Servicing
We recommend that maintenance work be carried out only by staff who
have received technical training from Markem-Imaje and who have the
appropriate personal protective equipment (e.g., safety goggles and
gloves). Any maintenance work not described in this manual must be
carried out by Markem-Imaje technicians.
Disconnect the printer from the mains before doing any operation requiring
components to be removed or exchanged.
Use appropriate tools for any work on the electrical and hydraulic circuits.
Do not leave rags soaked with consumables near the printer.
Caution: This unit contains a replaceable internal lithium ion battery. The
battery may burst or explode, releasing hazardous chemicals. Use only
the same type of lithium ion battery for replacement as a risk of explosion
occurs with the placement of an incorrect type. To reduce the risk of re
or burns, do not crush, puncture, or dispose of the battery in re or water.
To Next Page
Loading...
