Instruction manual
Control messages
24
If a Fault occurs the SmartDate X60 will stop printing if in
Producing mode and the Fault Alert screen will appear.
A complete list of error messages can be found in the
Troubleshooting section of the Maintenance manual PDF
on the CD.
In the case of a Warning the SmartDate X60 will continue
printing if in Producing mode. The Warning does not stop
the print cycle.
An example of a Warning might be “Low Ribbon”
Warning 2109
Low Ribbon
A new ribbon will be
required soon
Fault 1300
Cassette open
Close cassette to clear
fault
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
