00
3
Contents
08
38
Eject a Disc
Program Playing
33
Number Buttons 34
Setting the Playback Time 34
MO/ST Selector 34
34
Playing PBC (Menu) 34
Exit an USB 34
Tuner
Band Selector
Manual/Automatic Tuning
Selecting the Stored Station
DX/LOC Selector
MO/ST Selector
On-screen Display
Scanning/Memorizing Stations
Automatically
Number Buttons
Selecting Station Directly
35
35
35
35
35
36
36
36
36
Radio Menu 37
7
Additional Information
Simple Troubleshooting Guide 38
8
Simple Troubleshooting Guide
No power.
Check and make sure whether the fuse has blown,
replace with the proper value if necessary.
Some errors occur in
LCD or no function
pressing the button.
the
when
Unable to receive stations.
Poor effect on receiving a
station.
CDs cannot be loaded.
Sound skips.
No images.
Images skip.
Press RESET button.
Check and make sure whether the antenna is
inserted or the antenna is properly connected, if
not, insert the antenna or connect it properly.
Antenna may not be the proper length. Make sure
the antenna is fully extended; if broken, replace
the antenna with a new one.
A CD is loaded in the mechanism.
The CD is dirty or damaged.
The Video line from main unit to the TV is not
connected properly.
Improper setting of the color system. Set the color
system according to the
connected television.
to PAL or NTSC
.
.
.
Note:
If any of the problems persist after using the checklist , consult your nearest service dealer. Never
attempt to disassemble your unit by yourself.
The following checklist might help to solve the problems that you might meet when using
the unit. Please double check and make sure if the connection and the procedure of the
operation are set up properly before using the checklist below .
Problem
Cause/Solution
.
.
.
.
.
The antenna is poorly grounded, check and make
sure the antenna is properly grounded at its
mounting location .
.
Additional Information
To Next Page
Loading...
Need help?
General
