01
5
Before You StartTuner
36
07
Handle the disc by its edge to keep
the disc clean, and do not touch
the surface.
Do not attempt to modify the unit,
modifying the unit may cause an
accident.
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
Do not work in extremely high or
low temperature. Be sure the
temperature inside the vehicle
is between +60 C and -10 C
before turning on your unit .
To enjoy optimum sound and
images while playing, handle the
discs as follows:
Do not use your CDs with paste residue
or ink attached.
Do not use CDs with labels or stickers
attached, which may leave a sticky residue
while beginning to peel off.
(Shown as the picture)
Clean the discs with an optional clean-
ing cloth. Wipe each disc from the center out.
(Shown as the picture)
PRECAUTIONS
This unit can play the following discs only:
* This function is only operated by using rem-
ote control.
Type of disc
VCD
12cm
MP3
12cm
CD
12cm
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.
12cm
DVD
Label on the disc Recorded material
Sound and moving
pictures
Sound and moving
pictures
Sound only
Sound only
Size of disc
MPEG-4
Sound and moving
pictures
12cm
MPEG-4
USB
Sound and moving
pictures
Version 2.0
and less
Scanning/Memorizing Stations
Automatically
During radio status, you can press AMS
button on the remote control to scan each
stored station 5 seconds respectively which
stored in Number Buttons (from 1 to 6).
You can press the corresponding Number
Buttons or AMS button when your desired
station is charged ; it will start playing that
station.
When you press and hold AMS button, it
will automatically activate the memory stor-
ing function. The radio automatically selects
a station and has it stored in any one of the
Number Buttons from 1 to 6.
4
23
Notes:
Number Buttons
During radio mode, Number Buttons
from 1 to 6 can help you store your
favorite station. You can follow the
as below:
steps
You can store up to 18 FM stations 6 each
for FM1,FM2,FM3),up to 12AM stations
(6 each for AM1/MW and AM2/LW).
(
23
When receiving a station, press and hold
any one of the Number Buttons until CH
appears in the LCD, which indicates that
station is already stored in the corres-
ponding number button.
Note:
This function is operated by using the remote
control only.
The unit can be stored up to 6 stations for
each band.
Regarding the function of Number Buttons,
refer to Number Buttons for more inform-
ation.
*
*
*
4
Selecting Station Directly
Press GOTO button, the monitor shows:
FR:, input the number to receive the station
of this frequencies.
Note:
2
* This function is only operated by using rem-
ote control.
To Next Page
Loading...
Need help?
General
