Once you have separated the mic grid from the body, the inner pop filter
becomes visible. Gently unscrew it being careful not to touch the mesh.
All the parts should be assembled again in the opposite order. Be careful
to align the foam windscreen in the outer black metal mesh and reposition
the inner pop filter on the thread.
When remounting, take care to tighten the grid firmly, which secures the
inner pop filter properly.
Accessories included
DUA0415 Clip for 2028 Vocal Microphone
Replacement parts
DUA0410B Grid – including outer black metal mesh and
inner foam windscreen
DUA0411 Inner Cylindrical Pop Filter
To Next Page
Loading...
