Need help?Do you have a question about the DPA 4011 and is the answer not in the manual?
Details the 19mm diameter condenser-microphone cartridge used in Types 4011, 4012, 4015, 4016, noting its features.
Explains the preamplifiers used in the microphones, differentiating power requirements and features.
Describes the PCC4000 accessory for running high-voltage mics on standard 48V phantom power.
Details technical specifications for the preamplifiers, including frequency range, impedance, and polarity.
Lists included accessories such as microphone holders, suspension mounts, and windscreens.
Lists available accessories for purchase, including shock mounts, stereo accessories, and adapters.
Details the components of the 3511 cardioid stereo kit, including microphones and mounting hardware.
Provides guidelines for mounting, cleaning, and storing microphones to ensure longevity and performance.
Outlines the process for obtaining service and repairs, including contact information and warranty service policy.
Explains the two-year limited warranty covering mechanical functionality and documented specifications.
Confirms product conformity to European Community standards, including EMC and Low Voltage Directives.
General| Type | Condenser |
|---|---|
| Polar Pattern | Cardioid |
| Frequency Range | 20 Hz - 20 kHz |
| Sensitivity | 10 mV/Pa |
| Equivalent Noise Level | 18 dB(A) |
| Connector | XLR |
| Power Supply | 48V Phantom Power |
| Output Impedance | 200 Ohm |
| Max SPL | 152 dB |
To Next Page
