Need help?Do you have a question about the DPA 4060 and is the answer not in the manual?
Instructions for cleaning the microphone protection grid with distilled water.
Guide to removing residue from the microphone cable using organic oil or distilled water.
Using soft boost and high boost grids for acoustical equalization based on placement.
Guidelines for protecting the sensitive microphone diaphragm from dust and fluids.
Proper winding and care of the microphone cable to prevent damage and noise.
Safe and proper use of MicroDot connectors and connection adapters.
Steps to adjust the pre-formed headband for a secure fit on the neck.
Instructions for adjusting the size and mounting the boom for the adjustable headband.
General| Type | Omnidirectional |
|---|---|
| Frequency Range | 20 Hz - 20 kHz |
| Max SPL | 134 dB |
| Connector | MicroDot |
| Dynamic Range | 111 dB |
| Equivalent Noise Level | 23 dB(A) re. 20 µPa |
| Cable Length | 1.8 m (5.9 ft) |
| Dimensions | 5.4 mm (0.21 in) diameter |
| Sensitivity | 6 mV/Pa |
| Transducer Principle | Pre-polarized condenser |
To Next Page
