Need help?Do you have a question about the DPA 4099B and is the answer not in the manual?
Secure the gooseneck by sliding the fixation part over the grip for the 4099B.
Mount the 4099B on the bass between the bridge and tailpiece, adjusting the angle.
Secure the gooseneck by sliding the fixation part over the grip for the 4099C.
Mount the 4099C on the cello between bridge and tailpiece, adjusting angle.
Secure the gooseneck in the holder for the DPA 4099D drum microphone.
Illustrates two ways to mount the DPA 4099D clip on drums, upwards or downwards.
Provides application notes for snare and bass drums using the DPA 4099D microphone.
Adjust the height of the 4099G clip for various stringed instruments with body depth.
Choose desired gooseneck height and secure it in the grip for the 4099G.
Mount the 4099G on instruments by squeezing clamp knobs and releasing.
Offers a recommended miking placement for the DPA 4099G on guitars for balanced sound.
Secure the goosenecks of the 4099P system in their holders.
Describes how to position the DPA 4099P microphones within a piano frame.
Lists specific sensitivity tolerance for the DPA 4099P microphone pair.
Secure the gooseneck by sliding the fixation part over the grip for the 4099S.
Mount the 4099S on instruments by squeezing clamp knobs and releasing.
Provides guidance on mic placement for soprano and alto/tenor/baritone saxophones.
Secure the gooseneck by sliding the fixation part over the grip for the 4099T.
Mount the 4099T on instruments by squeezing clamp knobs and releasing.
Bend the gooseneck of the 4099T to fit instrument curves and adjust mic angle.
Secure the gooseneck in the holder for the DPA 4099U.
Offers tips for close-miking woodwinds like oboe, clarinet, and bassoon with the 4099U.
Adjust the height of the 4099V clip for various stringed instruments with body depth.
Bend the gooseneck of the 4099V to fit instrument curves and adjust mic angle.
Suggests preferred placement for the DPA 4099V on violins to avoid player interference and breath noise.
Displays the directional characteristics of the DPA 4099 microphone.
Shows the frequency response measured at 20 cm for the DPA 4099.
Illustrates the proximity effect exhibited by the DPA 4099 microphone.
General| Type | Condenser |
|---|---|
| Polar Pattern | Supercardioid |
| Connector | Microdot |
| Equivalent Noise Level, A-weighted | 23 dB(A) |
| Frequency Response | 20 Hz - 20 kHz |
| Output Impedance | 30 Ohm |
To Next Page
