15
GENERAL APPLICATION NOTES
• Always use the 4099 in its dedicated foam windscreen and
shock absorbing rubber mounts.
• When running wireless, it is recommended to use a low-cut
filter at 80 Hz in the transmitter to avoid handling and moving
noise. This low-cut filter is built into the DAD4099 XLR adapter
supplied with 4099G, 4099V 4099S, and 4099T.
• The optional DMM0007 Universal Surface Mounts can be
useful to control the cable run along the instrument.
Tip: The same gooseneck microphone boom can be used with
alternate clips that are specific to each instrument.
Bear in mind the difference in mic sensitivity according to differ-
ent instruments’ sound pressure levels – see page 3.
To Next Page
Loading...
