Dr.Meter IR-60 User Manual

Dr. meter Non-Contact Infrared Thermometer
Model: IR-60
User Manual
Safety Information

Please read this user manual carefully before using the thermometer.

Do not clean the thermometer with any solvents.
 Safety symbols:
Important notices against hazards
Compliant with European CE safety directive
This thermometer complies with the standards provided below:
 EN61326-1
 EN60825-1
Warning!
Do not point the thermometer’s laser at anyone’s eyes, or let the beam strike the eyes from
any reflective surface.
Important Notices
 When introducing the thermometer to a new environment, allow the unit 30 minutes to
adjust to temperature changes before usage. Temperature measurement can only resume
when the meter’s temperature is consistent with the new environment temperature.
 Keep the unit away from EMF (electro-magnetic fields) and induction heaters.

Do not point the unit’s laser directly at eyes.

Do not leave the unit on or near objects with high temperatures.
 Do not use this unit in areas where explosive gas, steam, dust and smog are present to
ensure uninterrupted measurement results.
 Keep the thermometer’s lens cone free from frost, oil and dirt to ensure accurate
temperature readings.
Product Illustration

Dr.Meter IR-60 Specifications

General

Type	Infrared Thermometer
Measurement Range	-58°F to 1022°F (-50°C to 550°C)
Display	LCD with backlight
Power Source	9V Battery
Distance to Spot Ratio	12:1
Auto Power Off	Yes
Response Time	<500ms
Emissivity	Adjustable (0.1 to 1.0)
Resolution	0.1°C or 0.1°F
Operating Temperature	0°C~40°C (32°F~104°F)
Spectral Response	8 to 14 μm

Summary

Safety and Precautions

General Safety Information

Read manual, cleaning, symbols, CE compliance, and standards for safe operation.

Laser Safety Warning

Avoid pointing laser at eyes or reflective surfaces to prevent injury.

Important Operating Precautions

Includes environmental adjustment, EMF avoidance, and handling guidelines.

Product Overview and Identification

Device Components and Controls

Identifies physical parts and controls of the infrared thermometer.

LCD Display Information

Explains primary, secondary, and functional display areas and indicators.

Operating the IR Thermometer

Setting Temperature Alarms

Guides on adjusting upper/lower alarm limits and default values.

Configuring Emissivity Settings

Details how to set emissivity for accurate infrared temperature readings.

Selecting Temperature Units

Explains how to switch between Celsius and Fahrenheit measurement scales.

Laser and Backlight Management

Covers enabling/disabling the laser pointer and controlling screen backlight.

Taking Temperature Measurements

Step-by-step guide for performing non-contact temperature measurements.

Understanding Distance-to-Spot Ratio

Explains the field of view and its relation to object size and distance.

Emissivity Reference Guide

Provides a table of emissivity values for various surface materials.

Replacing the Battery

Instructions for safely replacing the device's battery.

Technical Specifications