● Coin Depth Indication Cursor: It contains three grades, namely 2”,
4”and 6”, equivalent to 1, 2 and 3. It indicates the approximate depth of
the 2P copper coin in the neutral soil. It’s only the approximate depth.
The size and composition of the target, and the composition of the soil
will affect the indication value.
● Sensitivity Indication Cursor: It’s shared with the depth cursor, when
detecting metals, it turns into depth cursor automatically.The sensitivity
function is restored after few seconds. It is divided into three grades,
which is the highest when all lighted. By pressing the SENS button to
adjust.
● PINPOINT Cursor: Press and hold down the “PINPOINT” button, the
PINPOINT cursor is lighted, and the detector turns into NON-MOTION
mode, it’s fit for locating the detected object accurately.
● Battery Power Cursor: Light at ordinary times, when the battery
symbol flashing, which means the battery is insufficient, should replace
the battery in time.
CONTROLLER
All the controllers are on the panel. (See Fig.7)
To Next Page
Loading...
