DR.ÖTEK MT-XE - 2. Starting Up; 3. ALL METAL Mode Test

2. Starting up
Press POWER, the detector emits two chirping sounds, all LCD patterns
are lit for a moment, the detector default NORMAL status
3. ALL METAL mode test
After turning on, the ALL METAL cursor and LED are on. Samples of six
metal (nails, 5 ￠ nickel, pull ring, 1 ￠ zinc, 10 ￠ copper, 25 ￠
silver) were crossed 7-10cm(2.7-3.9’’) above the search coil.
a)The detector sounds "hum" in turn.
b)The depth ruler indicates the second level.
c)The target cursor flashes separately. The digital cursor displays the
corresponding number.
As listed in the table
Sample
Piton
5￠
Nickel
Pull Ring
1￠Zinc
Coin
10￠
Copper
Coin
25￠
Silver
Coin
Sound
bass
bass
alto
volume
alto
volume
high
pitch
high
pitch
Identify
Cursor
Instructions
Digital
Cursor
Instructions
10-40
41-50
55-65
70-75
80-83
86-88
(See graph 10, with iron nails as an example)