signals. The 0.78 - 1.18 inches (2-3cm) part of the head has higher
sensitivity when detecting.
Battery & Battery Cover
⚫ Requires a 9V alkaline battery.
⚫ When the white LED flashes continuously, it is time to change the
battery.
⚫ Remove the battery when not in use.
QUICK-START
In order to master the usage of the Pinpointer MT6 Pro, it is
recommended that you read the quick start carefully and practice it
indoors and use it outdoors.
1. Prepare a test group of metal targets. The MT6 Pro is a non-motion ALL
METAL detector. This means that as long as you are close to the target, it
will respond to all kinds of metal. You do not need to be moving or
swinging the pinpointer for it to locate a target. You can use a quarter
coin as a test target.
To Next Page
Loading...
