1. Take out needle cartridge from the sterilized packaging.
Preparation
How to apply the needle cartridge
5
Before assembling or disassembling the needle cartridge,
make sure the U-shaped point of the needle cartridge is
aligned with the point of the handpiece.
Place the used needle cartridges in a trash container. If the
needle cartridge is inadertently contaminated during installation
( i.e. Dropped on the floor, package opened/damaged. The needle
cartridge may be contaminated. ) ,Please discard it and get a new
needle cartridge.
The needle cartridge is designed for single use.
〔 Fig2 〕
〔 Fig1 〕
〔 Fig1 〕
2.
with the dot on the bottom of the device, and slightly push the
cartridge into the device. 〔 Fig2 〕
Find the “U” shape notch on the cartridge, align the notch
3. Lock the needle cartridge to the device by turning it clockwise.
4. Turn the needle cartridge counterclockwise and pull it out
when you would like to remove the cartridge.
5. Start the device only when the needle cartridge is assembled
correctly. Press and hold the power button for 3 seconds
to turn on/off the device.
To Next Page
Loading...
