Notes:
a. Please keep your weather clock away from concrete walls, cellars,
metal doors and equipment that generates magnetic fields such as
mobile phones, televisions, etc.
• Default Settings
The LCD display lights up with all the icons for 2 seconds and 3 beeps
when plugged in. Then, the alarm clock begins to search for RF
signals.
Batteries are only used to save the setting of your clock. Please
do not use batteries as main power supply (you will not be able
to operate the alarm clock when it is only powered by batteries).
Instead, please use the included power adapter.
•
a. Press this button to rotate the projection for 180 degrees.
b. Press and hold this button to adjust the brightness levels of
projection light: HI-LO.
Default Time: 12:00, 12-hour time format.
Date: 01/01 2018, Monday.
Alarm 1: 6:00 a.m. Alarm 2: 12:00 p.m.
Weather forecast: partly sunny
Default temperature unit:℃
Default projection: on
Note:
This weather clock is able to pair with three wireless sensors. One of
these is included in the package and you can choose to purchase two
more sensors separately if necessary.
Step 1. Plug in your alarm clock.
Step 2. Insert the batteries in the wireless sensor and use the TX
channel selector to choose the desired transmission channel (1, 2 or
3). Automatic data will be transmitted.
Setting the Wireless Sensor
- 06 -
To Next Page
Loading...