Alarm Setting Mode
In standard mode, press "ALARM" to enter alarm mode. The “AL1”
icon will appear on the screen.
Press "SET" button to confirm your setting and the Date icon starts to
flash, use “+/CH” and “-/C/F” buttons to set the correct date.
Press "SET" button to confirm your setting, then the Month and Date
icon starts to flash. Use “+/CH” and “-/C/F” buttons to set the date
format, Month/Date or Date/Month.
Press "SET" button to confirm your setting and the Weather
Forecast icon starts to flash. Use “+/CH” and “-/C/F” buttons to switch
the weather forecast icon.
Press "SET" (or you can wait for 30 seconds without further
operation) to save the setting and get out of the time setting mode.
You can press SNZ/LIGHT button to get out of the setting mode as
well to be back in the standard mode.
Press “ALARM” button to confirm your setting and the Minute icon of
Alarm 1 starts to flash. Use “+/CH” and “-/C/F” buttons to set the
desired minute.
In alarm mode, press and hold ALARM button for 2s until the Hour
icon of Alarm 1 starts to flash. Use the “+/CH” and “/C/F” buttons to
set the desired hour.
Press “ALARM” button to confirm your setting and the Repeat icon
starts to flash. Use “+/CH” and “-/C/F” buttons to set the repeat mode
of Alarm 1: M-F (Monday to Firday) or S-S (Saturday to Sunday) or
M-F and S-S (Monday to Sunday).
Press “ALARM” button to confirm your setting and the Snooze Time
(5 min-60 min) starts to flash. Use “+/CH” and “-/C/F” buttons to set
the desired snooze time for Alarm 1.
Press “ALARM” button to confirm your setting and the Hour icon of
Alarm 2 starts to flash. Use the “+/CH” and “-/C/F” buttons to set the
desired hour.
- 09 -
To Next Page
Loading...