EasyManuals Logo
Home>Dräger>Medical Equipment>Apollo

Dräger Apollo Supplement Paper

Dräger Apollo
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8 Supplement Paper Apollo SW 3.2n, SW 4.n
Chapter 9 - Alarms
Adjustment Range of the Alarm Limits
during Operation
With Software 3.2n:
With Software 4.n:
Chapter 11 – Cleaning and Maintenance
Maintenance intervals
Refer to the Apollo Instructions for Use.
Chapter 13 – Specifications
CO2 Module
FiCO2
[Vol.%]
0.1 to 1.4 Vol.%, – –
FiCO2
[Vol.%]
0.1 to 3.5
1)
, – –
1) DrägerService can change the upper limit to 1.4.
WARNING
Risk of patient injury.
To prevent the CO
2 module from malfunction-
ing, only the Dräger pressure reducer CO2 Pin
index (part no. 8607429) should be used. Only
use a CO
2 cylinder with this pressure reducer
to supply the CO2 module.
Inlet connection: Pin-Index coded pressure regulator
Inlet pressure 5 kPa x 100 ±20 %
(72.5psi ±20%)
CO
2 flow dosing: 0 to 0.6 L/min ±10 %
with an inlet pressure of 5 kPa x 100
(72.5 psi)
CO
2 flow meter 100 to 1000 mL/min
Accuracy ±50 mL/min
Resolution 50 mL/min

Other manuals for Dräger Apollo

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dräger Apollo and is the answer not in the manual?

Dräger Apollo Specifications

General IconGeneral
BrandDräger
ModelApollo
CategoryMedical Equipment
LanguageEnglish

Related product manuals