Need help?Do you have a question about the Dräger Savina 300 and is the answer not in the manual?
General| Power Supply | 100-240 V AC, 50/60 Hz |
|---|---|
| PEEP | 0 to 35 cmH2O |
| Inspiratory Flow | Up to 180 L/min |
| Trigger Sensitivity | Flow or Pressure Trigger |
| Ventilation Modes | SIMV, CPAP, BIPAP |
| Display | 12.1-inch color touchscreen |
| Patient Range | Adult, Pediatric |
| Tidal Volume Range | 50 to 2000 mL |
| Respiratory Rate | 4 to 80 breaths/min |
| Inspiratory Time | 0.2 to 5 seconds |
| FiO2 | 21% to 100% |
| O2 Supply Pressure | 2.7 to 6 bar |
Details safety warnings specific to the Savina 300's features.
Details risks associated with incorrect device usage and alarm signal audibility.
Warns against modifications, electric shock, and liquid ingress.
Highlights fire risks from flammable substances and flow sensor failure.
Explains essential performance criteria and alarm functionalities.
Provides critical safety information before assembling the device.
Covers essential safety precautions before operating the device.
Explains mandatory device and circuit checks for safe operation.
Covers initial parameter configuration for new patients.
Guides on performing readiness checks and initiating therapy.
Explains configuration of ventilation modes and parameters.
Explains how alarms are displayed, prioritized, and signaled.
Guides on configuring alarm thresholds for patient safety.
Explains how monitoring functions are activated and deactivated.
Covers flow measurement, calibration, and monitoring activation.
Explains FiO2 sensor usage, calibration, and monitoring activation/deactivation.
Covers CO2 measurement, cuvette selection, and monitoring activation.
Settings for pressure limitation, plateau, LPO, and other ventilation functions.
Covers user passwords, new patient start settings, and parameters.
Addresses issues related to power and gas supply interruptions.
Provides a systematic list of alarms, causes, and remedies.
Crucial safety guidelines before initiating any reprocessing steps.
Details approved methods for cleaning, disinfection, and sterilization.
Critical safety warnings for individuals performing service.
Specifies maintenance intervals and measures for device components.
Crucial safety notes before disposing of the device or its components.
Procedures for proper disposal of the electrical device.
To Next Page
