Dräger Savina 300 User Manual

Configuration
144 Instructions for use Savina 300 SW 5.n
Scanning the QR code
The QR code can be scanned.
Prerequisite: Savina 300 is in standby mode
General product information from the Dräger web
page is shown when a normal scan program is
used.
If the code is scanned using the Dräger
ServiceConnect app, detailed information on this
product is shown.
Prerequisite: The System setup > Options page is
opened.
 Scan the QR code using an appropriate device.

Dräger Savina 300 Specifications

General

Power Supply	100-240 V AC, 50/60 Hz
PEEP	0 to 35 cmH2O
Inspiratory Flow	Up to 180 L/min
Trigger Sensitivity	Flow or Pressure Trigger
Ventilation Modes	SIMV, CPAP, BIPAP
Display	12.1-inch color touchscreen
Patient Range	Adult, Pediatric
Tidal Volume Range	50 to 2000 mL
Respiratory Rate	4 to 80 breaths/min
Inspiratory Time	0.2 to 5 seconds
FiO2	21% to 100%
O2 Supply Pressure	2.7 to 6 bar