Need help?Do you have a question about the Dräger caleo and is the answer not in the manual?
General| Category | Infant Incubator |
|---|---|
| Temperature Control | Yes |
| Humidity Control | Yes |
| Height Adjustment | Yes |
| Humidity Control Range | 30% to 95% RH |
| Oxygen Control Range | 21 to 60 % |
| Power Supply | 220-240 V, 50/60 Hz |
Important safety notice for the medical device.
Information about Dräger's proprietary rights.
Guidelines for device repair and modification.
List of registered trademarks.
Specifies the subject of the main chapter.
Contains instructions for use of the device.
Contains text explaining the device and guiding the user.
Contains illustrations as a visual reference to the text.
Defines the operator's role in ensuring patient safety.
Provides definitions for terms used in the manual.
Highlights critical safety warnings and cautions.
Specifies the purpose and applications of the device.
Outlines limitations and conditions for device usage.
Diagram and labels of the front view of the Caleo incubator.
Diagram and labels of the side view and connections.
Diagram and labels of the top view of the Caleo incubator.
Details connections on the back of the control unit.
Identifies various labels and their meanings on the device.
Overview of the control unit's hard and soft keys.
Describes the default incubator parameter display.
Initial checks before first-time use of the incubator.
Instructions for attaching various accessories to the incubator.
Safety measures to be taken during infant care.
Step-by-step guide to powering on the Caleo incubator.
How to set and adjust air temperature for the infant.
Procedures for using skin temperature sensors.
Methods for switching between air and skin temperature control modes.
Instructions for using the humidity control system.
Guidance on using the oxygen control system.
Adjusting screen brightness levels for day and night.
Navigating through the incubator's menu system.
Viewing historical data graphically.
Analyzing trends in measured parameters.
Procedure for activating and using the cleaning mode.
Settings and parameters for device configuration.
How to lock and unlock the incubator's keypad.
Procedure for temporarily silencing active alarms.
Information on using the built-in infant weighing scale.
Steps for safely shutting down the incubator.
General precautions for cleaning and disinfecting the Caleo.
Procedures and agents for cleaning and disinfection.
Information on compatible disinfectants and procedures.
Instructions for disassembling the incubator components.
Checks before reusing the incubator after cleaning.
Definitions of maintenance-related terms.
Essential safety checks to perform on the device.
List of parts and their replacement intervals.
How to dispose of specific kits and filters.
Guidelines for disposing of O2 sensors and batteries.
Procedures for disposing of the incubator at its end of service life.
Lists and explains error messages displayed on the screen.
Identifies and provides remedies for device faults.
Explains the basic operational principles of the Caleo incubator.
Details the incubator's access features for patient care.
Information on the bed and mattress features.
Specific considerations for using the incubator with twins.
Instructions for performing X-rays with the infant inside.
How the integrated infant scale functions.
Describes the airflow system within the incubator.
Explains the mechanism of air temperature regulation.
How skin temperature is measured.
Explanation of continuous temperature monitoring.
Details the skin temperature control mode.
Information on the Kangaroo Mode operation.
How oxygen therapy is delivered and controlled.
Explanation of the humidity control system.
Overview of the incubator's safety features.
Details on alarm signals and priorities.
Explanation of symbols used throughout the manual.
Environmental conditions for operation and transport.
Electrical specifications and power requirements.
Key performance metrics of the incubator.
Specified values for temperature, O2, and humidity control.
Dimensions, weight, and load capacities of the unit.
List of incubator models and available accessories.
Part numbers for spare and consumable items.
To Next Page
