EasyManua.ls Logo

Dräger Infinity Cockpit C700 User Manual

Dräger Infinity Cockpit C700
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Infinity Acute Care System
This Infinity Quick Reference
Guide is not a replacement or
substitute for the Instructions for
Use (IFU). It is for informational
purposes only.
Software Level: VG4
Quick Reference Guide
Infinity Cockpit
C700 / C500
Question and Answer IconNeed help?

Do you have a question about the Dräger Infinity Cockpit C700 and is the answer not in the manual?

Dräger Infinity Cockpit C700 Specifications

General IconGeneral
Resolution1280 x 1024 pixels
Operating SystemWindows Embedded Standard 7
Power Supply100-240 VAC, 50/60 Hz
Operating Temperature10°C to 40°C
Storage Temperature-20°C to 60°C
IP RatingIP21
ConnectivityEthernet, USB
Humidity Range10% to 95% (non-condensing)
Supported ProtocolsHL7
CertificationsCE

Summary

Electrode & Lead Placement

DO'S & DO NOT'S for Electrode Placement

Provides essential guidelines for correct electrode application and critical precautions to observe.

Docking, Transport, Power & Key Functions

Monitor Docking and Transport Procedures

Instructions for docking/undocking the monitor, transport, and power functions.

Frequently Used Key Operations

Details the power on/off button, audio pause key, and rotary knob functions.

Interface Navigation and Controls

Blue Header Bar Elements

Identifies components displayed in the blue header bar, such as patient category and time.

Quick Access Symbols and Functions

Explains symbols for quick access to alarms, views, trends, and sensor parameters.

Function Key Mappings

Lists preconfigured and configurable function keys and their corresponding operations.

Patient Management and Status

Patient Category and Admission Data

Procedures for setting patient category and entering demographic data for admission.

Discharge, Standby, and Privacy Modes

Steps for discharging a patient, placing the monitor in standby, or activating privacy mode.

Alarm Management

Alarm Priorities Explained

Details the classification and characteristics of high, medium, and low priority alarms.

Alarm Pause and Setup Procedures

Instructions on pausing alarms, pre-silencing, and configuring alarm settings.

Screen Configuration and Views

Display Mode Setup and Auto View

Guides on setting display modes (Auto/Manual) and configuring the auto view toolbar.

Profile and View Selection/Restoration

Procedures for selecting, restoring, or changing patient profiles and screen views.

Parameter Setup and Monitoring

General Parameter Access and ECG Settings

How to access and configure general parameters, ECG pulse tone, and leads.

ECG Lead, Pacing & Report Configuration

Configuration for ECG leads, pacemaker detection, QRS threshold, and reports.

RRi Impedance Respiration Monitoring

Setup and adjustment for RRi respiration monitoring, including mode and waveform size.

SpO2, NIBP, and etCO2 Monitoring

Configuration for SpO2 pulse tone, NIBP measurements, and Mainstream etCO2 sensor.

12 Lead Monitoring and Invasive Pressures

Procedures for obtaining 12-lead ECG reports and managing invasive pressure settings.

Specific Parameter Measurements (PAWP, CO)

Steps for Pulmonary Artery Wedge Pressure and Cardiac Output measurements.

Calculation Procedures

Steps for performing calculations, capturing values, and printing reports.

Related product manuals