©
2015 Draeger
Medic
al
,
Inc
.
INFINITY COCKPIT QUICK REFERENCE GUIDE |20
THIS GUIDE IS INTENDED
FOR REFERENCE
ONLY. REFER
TO
INSTRUCTIONS FOR USE
MANUAL.ADDITIONAL INFORMATION
TO SELECT OR RESTORE A PROFILE
A profile consists of customizable pre-defined settings for each
patient category, and may include settings unique for each parame-
ter, the alarm defaults, and configurable menu bar keys. Default
Profile is restored when selected or upon discharge.
1. Select System setup…
2. Select Profiles
3. At drop down box, select down arrow and select desired pro-
file name. Default profile has an asterisk*.
o Profile may already be highlighted, but select, profile has
now been restored.
Note: Patient category does not change automatically.
TO SELECT A DIFFERENT VIEW
A View refers to the layout and content of the screen. Each profile
has a pre-defined view associated with it. Each profile can also
have alternate views associated with it.
1. Select Views… key on main menu bar.
2. Select name of desired view.
“Auto” in the name indicates a plug-and-play concept where the
content of the main screen depends on the connected parameter
signals.
REMOTE VIEW
Cockpit allows you to view data from other infinity monitors in the
same monitoring unit.
1. Select the Views button on the main menu bar.
2. Select the Remote view tab. This dialog lists all of the beds in
the monitoring unit.
3. Select a bed from the list in the Views... dialog to access the
remote view of an individual patient.
4. Select the Connect button.
To Next Page
Loading...
