Dräger Infinity Cockpit C700 - Patient Management and Status; Patient Category and Admission Data

© 2015 Draeger Medic al , Inc .
INFINITY COCKPIT QUICK REFERENCE GUIDE |13
THIS GUIDE IS INTENDED FOR REFERENCE ONLY. REFER TO INSTRUCTIONS FOR USE MANUAL.ADDITIONAL INFORMATION
Patient Category, Admit, Discharge,
Standby, and Privacy
PATIENT CATEGORY
Each patient category for Adult, Pediatric, and Neonate have specif-
ic defaults associated with it.
1. Touch patient category symbol
in left most field of the
blue header bar on Cockpit.
2. Select desired Patient category.
3. Press rotary knob to confirm setting.
o The message “Changing category will change alarm set-
tings and algorithmic processing” appears.
o Selected patient category icon will appear in blue
header bar.
Note: If you dock an M540 with a patient category that differs from the one
selected on the Cockpit, the patient category setting of the Cockpit changes
to match the M540.
ENTER PATIENTS DEMOGRAPHIC DATA FOR ADMISSION
1. Touch patient category symbol in left most field of the
blue header bar on Cockpit.
2. Select Name, ID, Birth date, Admit date, Physician, height
and weight, and use key board to enter data.
TO ADMIT A PATIENT USING “GET HIS” FUNCTION
1. Touch patient category symbol in left most field of the
blue header bar on Cockpit.
2. Enter the patient ID number.
3. Select Get HIS button on the demographics page.
o If button is grayed out and is not selectable, the Cockpit is
not connected to the hospital information system.
4. Demographics will populate automatically. If demographics do
not appear, confirm correct ID #.