EasyManua.ls Logo

Dräger Isolette C2000 - Service Manual

Dräger Isolette C2000
524 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
6016.036
man 223
Revision J
Because you care
Technical Service Manual
Isolette® Infant Incubator
C2000

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Dräger Isolette C2000 and is the answer not in the manual?

Dräger Isolette C2000 Specifications

General IconGeneral
BrandDräger
ModelIsolette C2000
CategoryMedical Equipment
LanguageEnglish

Summary

Chapter 1 Introduction

Operating Precautions

Details essential precautions for safe and effective operation of the incubator and its accessories.

Chapter 2 Troubleshooting Procedures

Alarms

Details high/low temperature alarms, system prompt messages, and alarm descriptions.

System Failure Messages

Lists system failure messages, their causes, and recommended actions for resolution.

There Is No Power, and Power Failure Alarm Does Not Activate

Troubleshooting steps for issues related to power failure and alarm activation.

Chapter 3 Theory of Operation

Chapter 4 Removal, Replacement, and Adjustment Procedures

Controller Assembly

Procedures for removing and replacing the controller assembly.

Hood Assembly

Instructions for safely removing and replacing the incubator hood assembly.

Heater Assembly

Step-by-step guide for removing and replacing the heater assembly.

Safety Tips

Provides critical safety warnings and guidelines for operating and maintaining the incubator.

Chapter 6 General Procedures

Oxygen Sensor Calibration

Procedure for calibrating the oxygen control system for accurate readings.

Weighing Scale Calibration

Steps to calibrate the incubator's weighing scale for accurate measurements.

Updating the Software

Instructions for updating the incubator's software using a computer.

Chapter 7 Accessories

Oxygen System

Procedures for installing, calibrating, and removing the oxygen system accessory.

Installation

Steps for installing the oxygen system accessory.

100% Calibration Fixture Installation

Instructions for installing the 100% oxygen calibration fixture.

Humidity System

Procedures for preparing, installing, and removing the humidity system.

Related product manuals